Setting Up a Tool Strip

If your SMART interactive product supports icon strips, you can set up tool strips, which make display, writing and drawing features easily accessible from the interactive screen.

You can position tool strips inside the black border on the left, right or bottom edge of the interactive product.

TIP: Make sure that the edge of the tool strip is aligned with the frame of the interactive product.

To set up the tool strip

  1. Open the SMART Notebook control panel.

  1. Press SMART Hardware Settings.

The upper area of the control panel displays an image of the SMART product connected to the computer.

  1. If your computer is connected to more than one SMART product, the upper area of the control panel displays an image of each SMART product. Press the image of the product with the settings that you want to change.

  2. Select Set Up Icon Strips from the drop-down list.

  3. Press Add.

The Available Strips dialogue box appears.

  1. Select Tool Strip and then press OK to display the calibration screen.

  2. Follow the on-screen instructions to define the corners of the tool strip.

NOTES

If you press the interactive screen too far from the edge of the icon strip, an error message appears and you must try again.

You can change the behaviour of icons and reposition or remove the tool strip at any time.

  1. Press OK to close the control panel.