Control panel

Turns the projector on or puts it into Standby mode.
Select the Power ON or Power OFF button.

Returns projector settings to default values or refreshes the current settings. Select Submit or Refresh.

Turns off the closed captioning feature or sets the closed captioning language to CC1 or CC2.

Typically, CC1 displays U.S. English subtitles, while CC2 displays other regional languages, such as French or Spanish, depending on television channel or media setup.

Enables or disables signal searching of input connectors.

• Select On to have the projector continuously switch inputs until it finds an active video source.

• Select Off to maintain signal detection in one input.

Select On to show or Off to hide the lamp replacement reminder when it appears. This reminder appears 100 hours before the recommended lamp replacement.

Adjusts lamp brightness to Standard or Economy. Standard displays a high-quality, bright image. Economy increases the lamp life by decreasing the brightness of the image.

Sets the length of the auto power off countdown timer between 1 and 240 minutes. The timer begins to count down when the projector no longer receives a video signal. The timer finishes when the projector enters Standby mode. Select 0 to turn off the timer.

Adjusts the speed of the projector’s fan. Select Normal or High .

Assigns an alternative name to your VGA 1 input, which appears when you select the VGA 1 input.

Assigns an alternative name to your HDMI input, which appears when you select the HDMI input.

Assigns an alternative name to your Composite video input, which appears when you select the Composite video input.

Turns the on-screen alert broadcast message on or off. When enabled, this message displays over the current projected image.