You are here: Remotely managing your interactive projector > Network settings

Network settings

This menu allows you to use or not use Dynamic Host Control Protocol (DHCP) and to set the network-related addresses and names when DHCP is not used.

Submenu setting	Description
DHCP	Determines if the projector’s IP address and other network settings are dynamically assigned by a DHCP server or manually set. On allows the network’s DHCP server to assign a dynamic IP address to the projector. Off allows you to manually set the projector’s IP address and other network settings.
IP Address	Displays or allows you to set the projector’s IP address in values between 0.0.0.0 and 255.255.255.255.
Subnet Mask	Displays or allows you to set the projector’s subnet mask number in values between 0.0.0.0 and 255.255.255.255.
Gateway	Displays or allows you to set the projector’s default network gateway in values between 0.0.0.0 and 255.255.255.255.
DNS	Displays or allows you to set the projector’s IP address for your network’s primary domain name server in values between 0.0.0.0 and 255.255.255.255.
Group Name	Displays or allows you to set the projector’s workgroup name (maximum 12 characters).
Projector Name	Displays or allows you to set the projector’s name (maximum 12 characters).
Location	Displays or allows you to set the projector’s location (maximum 16 characters).
Contact	Displays or allows you to set the contact name or number for projector support (maximum 16 characters).
SNMP	Turns the Simple Network Management Protocol (SNMP) agent on or off.
Read-Only Community	Sets a password that is required for each SNMP get request to the device. Note The default password for Read-Only Community is Public.
Read/Write Community	Sets a password that is required for each SNMP set request to the device. Note The default for Read/Write Community is Public.
Trap Destination Address	Displays or allows you to set the IP address of your network’s SNMP TRAP manager in values between 0.0.0.0 and 255.255.255.255. The trap destination address is the IP address of the computer assigned to handle unsolicited data generated by SNMP TRAP events generated by the projector, such as power state changes, projector failure modes, a lamp needing to be replaced or other issues.