Résoudre les problèmes de récepteur

Attention 

Do not open the receiver or the clicker units to attempt repairs. Refer all service inquiries to authorized SMART service personnel.

Resetting the receiver

If your SMART Response system behaves erratically (possibly because of a static discharge or power fade), you might be able to restore normal operation by resetting the receiver.

Reset the receiver completely by disconnecting and then reconnecting the USB cable.

Interpreting the receiver indicator lights

If you experience a problem with your receiver, you can use its indicator lights to troubleshoot it.

Indicateur d'état

Transmit light

Receive light

Receiver state

Red, green, yellow

Vert

Vert

The receiver is starting up. Lights flash in sequence.

Vert clignotant

Éteint

Éteint

The receiver is scanning radio channels.

Vert clignotant

Any state

Any state

The receiver is accepting commands from the computer.

Vert

Constant flashing

Flashes when it receives data from a clicker

Receiver has power and is communicating with the computer, but it isn’t receiving commands.

Jaune

Éteint

Éteint

The receiver has power, but communication circuits have failed.

Rouge clignotant

Flashing

Flashing

Manufacturing tests are running, and the receiver isn’t operational. All lights flash together.

Flashing yellow

Any state

Any state

The receiver software checksum failed.

Flashing yellow

Flashing

Flashing

The receiver has a software failure.