Changing the Axis of Your SMART Product

IMPORTANT: Change the product's advanced settings only if asked to do so by SMART Technical Support.




If your SMART product uses DViT technology, you can edit SMART hardware settings to change its axis. When you change the axis, the orientation of the interactive screen changes from horizontal (landscape) to vertical (portrait) mode and vice versa.

NOTE: You may also need screen-rotation software to rotate the portrait image so that it fits correctly on the display.




To change the axis

  1. Open the SMART Notebook control panel.

  1. Press SMART Hardware Settings.




The upper area of the control panel displays an image of the SMART product connected to the computer.

  1. If your computer is connected to more than one SMART product, the upper area of the control panel displays an image of each SMART product. Press the image of the product with the settings that you want to change.

  2. Select Advanced Settings in the list.

  3. Select an axis setting in the Board Axis Settings area.

  4. Press OK to close the control panel.