Removing Icon Strips

If you set up a tool strip or custom icon strip, you can remove it at any time. After you physically remove the strip, you must remove its properties in SMART Hardware settings.

To remove icon strips

  1. Open the SMART Notebook control panel.

  1. Press SMART Hardware Settings.

The upper area of the control panel displays an image of the SMART product connected to the computer.

  1. If your computer is connected to more than one SMART product, the upper area of the control panel displays an image of each SMART product. Press the image of the product with the settings you want to change.

  2. Select Set Up Icon Strips in the list.

  3. Select the strip you want to remove.

  4. Press Remove.

  5. Press OK to close the control panel.