Previous TopicNext Topic
You are here: Using your interactive product > Configuring your interactive product > Changing the axis of your interactive product

Changing the axis of your interactive product

Important 

Complete the procedure below only if asked to do so by SMART Support.

If your interactive product uses DViT technology, you can edit SMART hardware settings to change its axis. When you change the axis, the orientation of your interactive product changes from horizontal (landscape) to vertical (portrait) mode and vice versa.

Note 

You may also need screen-rotation software to rotate the portrait image so that it fits correctly on the display.

To change the axis

  1. Press the SMART Board icon in the notification area, and then select Control Panel.

    Note 

    If your computer isn’t currently connected to an interactive product, the SMART Board icon includes an X in its lower-right corner .

  2. Press SMART Hardware Settings.

    If your computer is connected to more than one interactive product, the upper area of the control panel displays an image for each product. Press the image of the product you want to change settings for.

  3. Select Advanced Settings in the list.

  4. Select an axis setting in the Board Axis Settings area.

  5. Press OK to close the control panel.

© 2008–2011 SMART Technologies ULC. All rights reserved.
Last updated June 14, 2011.
Legal information