Previous TopicNext Topic
You are here: Using your interactive product > Configuring your interactive product > Setting up icon strips > Removing icon strips

Removing icon strips

If you set up a tool strip or custom icon strip, you can remove it at any time. After you physically remove the strip, you must remove its properties in SMART Hardware settings.

To remove icon strips

  1. Press the SMART Board icon in the notification area, and then select Control Panel.

    Note 

    If your computer isn’t currently connected to an interactive product, the SMART Board icon includes an X in its lower-right corner .

  2. Press SMART Hardware Settings.

    If your computer is connected to more than one interactive product, the upper area of the control panel displays an image for each product. Press the image of the product you want to change settings for.

  3. Select Set Up Icon Strips in the list.

  4. Select the strip you want to remove.

  5. Press Remove.

  6. Press OK to close the control panel.

© 2008–2011 SMART Technologies ULC. All rights reserved.
Last updated June 14, 2011.
Legal information