Configuring multiple displays

If you have multiple touch-enabled interactive whiteboards or interactive flat panels connected to a single computer, Windows may not assign touch to the correct display. The calibration or orientation of the interactive product proceeds as expected, but your touch on one display registers on another.

Install the interactive whiteboards or interactive flat panels and complete the calibration and orientation processes on each display, and then perform the following procedure.

To configure your pen and touch displays

1. Open the Windows Control Panel in Category view.

2. Click Hardware and Sound, and then click Tablet PC Settings.

   The Tablet PC Settings dialog box appears.

3. Click Setup.

   The Identify pen or touch input screens dialog box appears.

4. Click Touch input.

5. Follow the on-screen instructions. You’ll be asked to touch the interactive displays one at a time. You may have to touch a display twice before you’re asked to press ENTER to move to the next step.

6. Press ESC to end the process after touching the last display.

7. Verify that touch recognition is working correctly by checking to see that the cursor appears on the same display you’re touching.