Calibrating your SMART interactive product

Calibrating cameras

If your SMART interactive product uses DViT technology, SMART Support might ask you to calibrate the cameras and orient the interactive screen to resolve issues.

Issues relating to DViT technology could include areas of the screen that don’t respond when you press, inaccurate or erratic screen response, uneven digital ink or digital ink with gaps.

To calibrate your SMART Board interactive flat panel, SMART Board interactive whiteboard or SMART Podium interactive pen display

1. Press the SMART Board icon in the notification area, and then select SMART Settings.

   Note 

   If your computer isn’t currently connected to a SMART interactive product, the SMART Board icon includes an X in its lower-right corner.

2. Press SMART Hardware Settings.

   If your computer is connected to more than one SMART interactive product, the upper area of the SMART Settings window displays an image for each SMART interactive product. Press the image of the SMART interactive product you want to change settings for.

3. Select Advanced Settings in the drop-down list.

4. Press Calibrate.

   The four-point calibration screen appears.

5. Press and hold the center of each target until you hear a beep.

   After you press the final target, a message appears, and then an orientation screen appears.

6. Orient your SMART interactive product (see Orienting your SMART interactive product).

   Note 

   You don’t hear a beep when you press targets on the orientation screen.

Optimizing the light curtain

SMART Support might ask you to optimize the light curtain for your LightRaise interactive projector to resolve issues.

To optimize your LightRaise interactive projector light curtain

1. Press the SMART Board icon in the notification area, and then select SMART Settings.

   Note 

   If your computer isn’t currently connected to a SMART interactive product, the SMART Board icon includes an X in its lower-right corner.

2. Press SMART Hardware Settings.

   If your computer is connected to more than one SMART interactive product, the upper area of the SMART Settings window displays an image for each SMART interactive product. Press the image of the SMART interactive product you want to change settings for.

3. Select Advanced Settings in the drop-down list.

4. Press Touch Detection.

5. Follow the on-screen instructions.