Orienting your SMART interactive product after installation

If after you install SMART Meeting Pro software on a multiple display system your touch on one screen registers on another, you must orient your interactive product again.

Use the following procedure to orient your interactive product using SMART Settings.

To orient multiple interactive products

1. Press the SMART Board icon in the notification area, and then select Orient.

   Notes 

   • You can also access the orientation screen by pressing the Orient button on your SMART interactive product. See your interactive product’s user’s guide for the location of this button.

   • If your computer isn’t currently connected to an interactive product, the SMART Board icon is gray and includes an X in its lower-right corner.

   • Sometimes, the orientation screen appears on your primary interactive product instead of the interactive product you want to orient. If this happens press SPACEBAR until the orientation screen appears on the interactive product you want to orient.

2. Touch the center of each target in the order indicated. The computer registers the point on the interactive product where you remove your finger or pen tool from the surface.

   The orientation procedure involves pressing 4, 9, 12 or 20 targets, depending on the orientation level you select (see the SMART Meeting Pro software online Help for more information on changing the orientation level of your interactive product).