Voi siete qui: Guida del software didattico 2015 > Manutenzione e risoluzione dei problemi > Manutenzione del sistema SMART Response > Risoluzione dei problemi del sistema SMART Response > Sostituzione delle batterie dei clicker

Changing the clicker batteries

Under normal operating conditions, the clicker batteries can operate for up to 200 days. When you replace them, use fresh batteries of the same type and quality, and change all of them at the same time.

Importante 

If you are not using your clickers for an extended period or if the clicker batteries are exhausted, remove the batteries from your clickers. Damage caused by leaking batteries is not covered under the product warranty.

Attenzione 

  • Do not install batteries with the polarity (+/-) reversed.

  • Do not attempt to recharge the batteries.

  • Do not dispose of batteries in a fire or incinerator.

  • Dispose of batteries according to your region’s laws and regulations. If you don’t know the applicable rules for your region, consult your battery manufacturer.

ClosedPer sostituire le batterie dei clicker

  1. If the clicker is on, turn it off.

  2. Using the included Phillips screwdriver, remove the screw from the back of the clicker, and then remove the cover.

  3. Remove all of the exhausted batteries and dispose of them according to local regulations.

  4. Insert fresh batteries.

  5. Replace the cover and screw.