You are here: Education Software 2015 Help > Maintenance and troubleshooting > Maintaining your SMART Response system > Troubleshooting your SMART Response system > Resetting clickers

Resetting clickers

If a clicker isn’t operating as expected, you might need to reset it. Perform the following steps to reset your clicker.

ClosedTo reset a clicker

  1. If the clicker is on, turn it off.

  2. Using the included Phillips screwdriver, remove the screw from the back of the clicker, and then remove the cover.

  3. Remove the batteries.

  4. Press and hold the Power button for at least five seconds.

  5. Replace the batteries.

  6. Replace the cover and screw.