You are here: Education Software 2015 Help > Beyond the basics > Using your SMART Response system > Getting started > Starting SMART Response LE software the first time > Pairing student clickers

Pairing student clickers

Important 

You must connect the receiver and start a class before you can pair the clickers with the receiver.

ClosedTo pair clickers with the SMART Response receiver

  1. If a class isn’t running, start Teacher Tools. See Starting Teacher Tools.

    Teacher Tools appears.

  2. Select Anonymous Mode, and then click Start Class.

    The receiver’s Power light flashes and then turns solid green. The receiver’s Transmit light flashes green.

  3. Press the clicker’s Power and Menu buttons simultaneously for two seconds.

    Teacher Mode appears on the screen.

  4. Using the clicker’s Up and Down buttons, select Scan & Pick, and then press Enter.

    The clicker searches for available classrooms.

  5. Use the clicker’s Up and Down buttons to select your class from the list, and then press Enter.

    If your connection is successful, a “Paired With RCV” message appears.

  6. Use the Up and Down buttons to select Exit, or hold down the clicker’s Power button to turn off the clicker.

  7. Repeat steps 3 through 6 for the rest of your clickers.

You’re now ready to start a class and ask questions in Anonymous mode. See Asking instant questions to ask single questions, or see Adding questions using the Insert Question wizard to create assessments.